2-9-3
Content
JO 7110.65BB, Change 3, effective July 9, 2026 · Official text on faa.gov
- Include the following in ATIS broadcast as appropriate:
- Airport/facility name.
- Phonetic letter code.
- Time of the latest weather sequence (UTC).
- Weather information consisting of:
- Wind direction and velocity.
- Visibility.
- Obstructions to vision.
- Present weather consisting of: sky condition, temperature, dew point, altimeter, a density altitude advisory when appropriate, and other pertinent remarks included in the official weather observation. Always include weather observation remarks of lightning, cumulonimbus, and towering cumulus clouds.
- Instrument approach and runway in use.
- Man-Portable Air Defense Systems (MANPADS) alert and advisory. Specify the nature and location of threat or incident, whether reported or observed and by whom, time (if known), and notification to pilots to advise ATC if they need to divert.
- Terminal facilities must include reported unauthorized laser illumination events on the ATIS broadcast for one hour following the last report. Include the time, location, altitude, color, and direction of the laser as reported by the pilot.
- The ceiling/sky condition, visibility, and obstructions to vision may be omitted if the ceiling is above 5,000 feet and the visibility is more than 5 miles.
- Instrument/visual approach/es in use. Specify landing runway/s unless the runway is that to which the instrument approach is made. Before advertising non-precision approaches, priority should be given to available precision, then APV approaches.
- Departure runway/s (to be given only if different from landing runway/s or in the instance of a “departure only” ATIS).
- Taxiway closures which affect the entrance or exit of active runways, other closures which impact airport operations, other NOTAMs and PIREPs pertinent to operations in the terminal area. Inform pilots of where hazardous weather is occurring and how the information may be obtained. Include available information of known bird activity.
- When a runway length has been temporarily or permanently shortened, ensure that the word “WARNING” prefaces the runway number, and that the word “shortened” is also included in the text of the message.
- Available runway length, as stated in the NOTAM, must be included in the ATIS broadcast. This information must be broadcast for the duration of the construction project.
- For permanently shortened runways, facilities must continue to broadcast this information for a minimum of 30 days or until the Chart Supplement has been updated, whichever is longer.
- Runway Condition Codes (RwyCC)when provided. Include the time of the report.
- Runway Condition Codes “3/3/3” and the statement “Slippery When Wet.”
- Runway Condition codes “X/X/X.” When a FICON NOTAM indicates these values, the statement “Runway Condition Codes Missing” must be included on the ATIS broadcast.
- Other optional information as local conditions dictate in coordination with ATC. This may include such items as VFR arrival frequencies, temporary airport conditions, LAHSO operations being con-ducted, or other perishable items that may appear only for a matter of hours or a few days on the ATIS message.
- When all 3 runway segments (touchdown, midpoint, and rollout) are reporting a code of 6, the Airport Operator will notify ATC that runway condition codes are no longer reportable.
- Low level wind shear/microburst when reported by pilots or is detected on a wind shear detection system.
- A statement which advises the pilot to read back instructions to hold short of a runway. The air traffic manager may elect to remove this requirement 60 days after implementation provided that removing the statement from the ATIS does not result in increased requests from aircraft for read back of hold short instructions.
- Instructions for the pilot to acknowledge receipt of the ATIS message by informing the controller on initial contact.